Snakeoil Firmware 1.2.2 Testing Builds

[agent_kith]

This is an early alpha release, I would recommend you test this in a virtual machine, or on a second SSD. I'm testing this on the Raspberry Pi 4 (8GB) myself as I hope that's going to be my primary rig in the future.

There are still some issues with this release (1.2.2.0), namely:

1. Translations is incomplete for Non English editions, this will be fixed soonish
   
2. Snakeoil RestAPI can't seem to terminate properly in some cases (this is because sometimes it can't stop the players it started). Hopefully I can make the exit even more graceful before.
   
3. PHP is still enabled on the web server. This is really just to make sure folks can fall back to the old editions if needed
   
4. Display quirks here and there after updating to bootstrap 5.
   

Other notes:

1. Always remember to do a backup of your existing configuration before proceeding. As mentioned previously, the backup only back up the Snakeoil configuration, but that's OK.
   
2. There may be some caching issues after the upgrade. Do a force reload, or clear any old browser cache on your Snakeoil PC's IP if you have problems.
   

  snakeoil-1.2.2.0-armv7l.fw (Size: 39.42 MB / Downloads: 1)
  snakeoil-1.2.2.0-x86_64.fw (Size: 41.43 MB / Downloads: 10)

Over the next few days/weeks I'm going to finish up on all the issues, and then release this so I can start work on the Kernel builder. Best laid plans of mice and men, it better goes to plan!