Snakeoil 1.4.0 (High End)

[uglymusic]

Hey, pal, look, now is already 1.4.3.   The improvement of the sound is a big lap.  https://forums.snakeoil-os.net/Thread-Sn...igh-End-U3
And do you have 2 NVMe drive on your Pi 5 for this? 

Sorry. Being lazy. I have 1.4.3 installed.

Just one 4TB drive, with the source of truth being on my Synology. The idea is to move the files away from the NAS' noisy environment and push changes over to the Pi server.

Ic. Right.  That will make much better sound. 
I use a micro SD card to boot pi 5, and a 2T NVMe for music files storage.  As if I have to reinstall the OS, I don't have to copy 2T files again, it takes at least 6 hrs.........

That is interesting. I hadn't thought about reinstalling the OS. This is why you were asking about two NVMe drives.

I find my server destroys SD cards, even heavy duty ones, in anything from 6 months to 2 years depending on the card. Where will the indexes reside if I don't move everything to the NVMe drive and use the SD card for booting? I'm thinking I won't solve the SD eating behaviour.

Well, your SD problem is strange.  Just a wild guess, is the power supply, or temperature problem?  Well, anyway, maybe just clone an image periodically.... haha..... 
In fact, how about u just use a tiny usb flash drive to boot, e.g. "Sandisk Ultra Fit".   I hope your system won't kill USB drive, too.

I doubt it. It has happened with RPi 4 and 5 with a handful of different power supplies. The Pis have always been adequately cooled. The 5 has an official fan and is in an open case. And I always use SanDisk cards when I can.

Funny you should say about the USB drive. I have one of the very same that I've been looking for. That could be the best solution until I can get a twin NVMe card and an additional NVMe drive for the OS. I'll see how I get on with the USB drive.

[agent_kith]

That is interesting. I hadn't thought about reinstalling the OS. This is why you were asking about two NVMe drives.

I find my server destroys SD cards, even heavy duty ones, in anything from 6 months to 2 years depending on the card. Where will the indexes reside if I don't move everything to the NVMe drive and use the SD card for booting? I'm thinking I won't solve the SD eating behaviour.

That's a good point. I didn't consider that MicroSD cards have very poor write longevity for the most part. it's a consumable.. And I havn't really thought about that..

Going to create a feature to allow you to MPD/LMS and Snakeoil config files to another path, doing so you can move the configuration files to another location (NVME/SSD or NAS)...

Note that Raspberry Pi 5 can directly boot from a SSD now (Pi4 will require a firmware update). I'm using SSDs over microsd (SSD last longer but will still die eventually).

[uglymusic]

That is interesting. I hadn't thought about reinstalling the OS. This is why you were asking about two NVMe drives.

I find my server destroys SD cards, even heavy duty ones, in anything from 6 months to 2 years depending on the card. Where will the indexes reside if I don't move everything to the NVMe drive and use the SD card for booting? I'm thinking I won't solve the SD eating behaviour.

That's a good point. I didn't consider that MicroSD cards have very poor write longevity for the most part. it's a consumable.. And I havn't really thought about that..

Going to create a feature to allow you to MPD/LMS and Snakeoil config files to another path, doing so you can move the configuration files to another location (NVME/SSD or NAS)...

Note that Raspberry Pi 5 can directly boot from a SSD now (Pi4 will require a firmware update). I'm using SSDs over microsd (SSD last longer but will still die eventually).

Moving the SO config files sounds good, but I wonder if the USB boot drive idea might be just as good, although as I type this I also wonder if the speed of NVMe might be worthwhile for frequently accessed files like the indexes.

I have a very early RPi 5, but have attempted to update the firmware, but it's still refusing to boot from USB or NVMe. So it looks like the upgrade didn't take. So back to Square One.

Edit: The firmware is definitely updated but I cannot boot from either the NVMe or USB drives in Ubuntu or Raspberry Pi OS. It looks like I may have a faulty RPi 5.