Snakeoil Installer- 1.2.6 (Gear Isolation U6)

[mkysimes]

As being inspired by a pal's complaint, few days ago I digged a new way to install.  So that ubuntu studio leaves least footprint in storage, so to the system, and saves all the hassle between UbuntuStudio and the USB drive.  Before installing with SO installer, UbuntuStudio can boot faster, run more responsively, and almost with no bundled software to remove.  For the latency value in cyclic test, the only significant difference is the MAX value.  Now Max is very close to the Act and Avg values.  And for the sound, "seems" it's better to my ear...... haha.......

 

Look, the way to install is:
1) installing the ordinary Ubuntu 22.04.1 (NOT the UbuntuStudio), choosing "Minimum installation";
2) after installation and rebooted to the Ubuntu 22.04.1 desktop, just skipping all the setting and update;
3) pressing alt-ctrl-T to bring up the Terminal;
4) "sudo su", and then "apt -y install ubuntustudio-installer"; https://ubuntustudio.org/ubuntu-studio-installer/
5) double clicking the colourful icon of "UbuntuStudio Installer" in the app drawer (app drawer is a icons of dots sitting at the lower left hand corner of the screen);
6) after a few seconds a window will pop up and ONLY choosing "linux-lowlatency", and then clicking the "Install selected package" button at the lower right hand corner, and letting it run;

7) after the windows popped out saying it's finished, then click ok/close, and then rebooting the system;
8) after rebooted to the desktop, bringing out the Terminal again, and entering "uname -a" to check the kernel versoin, you'll see "lowlatency" "PREEMP" bla bla bla wording, then it's successfully using UbuntuStudio kernel onward;
9) "sudo su", "apt -y remove ubuntustudio-installer", "apt -y autoremove"
10) the rest is the same as normal SnakeOil Installer working procedure

Enjoy and Have Fun!

Curious if others have tried this with Rpi4 as I got interrupted while running the Snakeoil script. Something about wrong processor. I was using the armv7 install 1.2.6. Anyone else try this with Rpi?

Quick Update:

Tried different way of installing Ubuntu Studio on Rpi4 (Took forever!!!) and found that it must be something with the 1.2.6 installer. Encountered this message:

Checking CPU: Wrong installer, please use aarch64 installer. Install aborted with errors!

Tried the 1.2.0 installer and aborts trying to install Snakeoil blob. At least it made it further. When I have more time I will try from scratch and report back.