Using Snakeoil on a Minnowboard TurboT

[Bromf]

Rufus..?  FAT32...?    Build using etcher and 'any other' file-system ....

https://etcher.io/

https://minnowboard.org/tutorials/instal...buntu-lts/
https://minnowboard.org/tutorials/best-p...-selection
 1 Normal BIOS initialization When the board is first powered on, the following indications are provided:

• HDMI: The screen blanks, then a 5-second progress bar appears. Pressing F2 or Delete in this period aborts the normal boot process.
  
• Serial port: The screen is cleared, then a 5-second countdown appears. Pressing Esc or Delete in this period aborts the normal boot process.
  

If a bootable image is found on one of the media, the BIOS attempts to load it. The order the media is probed is configurable, but the factory default is [what is the default on the 0.96 and 0.64 FW?]If no image is found, or no image successfully loads, the BIOS drops into the UEFI shell, with a display showing the media that was detected, and a shell prompt. To access the BIOS GUI menu, type

Code:

exit

and press Enter or Return.If the normal boot process was aborted by pressing one of the abort keys, the BIOS GUI is immediately shown.