Snakeoil Firmware - 1.2.11 (Gear Isolation U11)
|
Posts: 65
Threads: 9
Likes Received: 11 in 10 posts
Likes Given: 28
Joined: Jan 2021
Reputation:
11
Location: India
(13-Apr-2023, 12:05 PM)hkphantomgtr Wrote: (12-Apr-2023, 02:14 PM)vinaymoturi Wrote: (11-Mar-2023, 01:20 PM)hkphantomgtr Wrote: (11-Mar-2023, 05:17 AM)musicnut23 Wrote: ↵
(13-Apr-2023, 12:05 PM)hkphantomgtr Wrote: (12-Apr-2023, 02:14 PM)vinaymoturi Wrote: (11-Mar-2023, 01:20 PM)hkphantomgtr Wrote: (11-Mar-2023, 05:17 AM)musicnut23 Wrote: Hi there! It's been over a year since I peeked into the Forums to check the status of everything, and even longer since I went through the install process. Been running on 1.2.something with JRiver 27, but will be trying out the latest over the weekend.
I'm a little fuzzy on the install process. Do I need to start with 1.2.6 and load every firmware update up-to and including 1.2.11, or does 1.2.11 include all the updates in-between?
Note: This will be a clean install of Ubuntu 22.04LTS and SnakeOil on a seperate drive. Not upgrading the existing setup.
If you're starting from the ordinary Ubuntu desktop distro, then please choose "Minimum Installation" for much unnecessary softwares.
And then after successfully installed, please type a command to replace the kernel with the lowlatency kernel. That will significantly improve sound quality in all aspects.
If you would like to further enhance the sound quality, of course the RT kernel is the best and you can directly install RT kernel from ordinary kernel, without installing Low Latency kernel. But you need to go thru some more simple and straightforward steps.
And after everything is set, you may play around with the clocksource. To me, HPET let me enjoy the sound much more than TSC.
Have fun! 
what is the command for replacing the kernel with lowlatency kernel
Code: sudo apt install linux-lowlatency
Hi there! It's been over a year since I peeked into the Forums to check the status of everything, and even longer since I went through the install process. Been running on 1.2.something with JRiver 27, but will be trying out the latest over the weekend.
I'm a little fuzzy on the install process. Do I need to start with 1.2.6 and load every firmware update up-to and including 1.2.11, or does 1.2.11 include all the updates in-between?
Note: This will be a clean install of Ubuntu 22.04LTS and SnakeOil on a seperate drive. Not upgrading the existing setup.
If you're starting from the ordinary Ubuntu desktop distro, then please choose "Minimum Installation" for much unnecessary softwares.
And then after successfully installed, please type a command to replace the kernel with the lowlatency kernel. That will significantly improve sound quality in all aspects.
If you would like to further enhance the sound quality, of course the RT kernel is the best and you can directly install RT kernel from ordinary kernel, without installing Low Latency kernel. But you need to go thru some more simple and straightforward steps.
And after everything is set, you may play around with the clocksource. To me, HPET let me enjoy the sound much more than TSC.
Have fun! 
what is the command for replacing the kernel with lowlatency kernel
Code: sudo apt install linux-lowlatency
hi,
I installed the low latency kernel, but, no hpet option in my system ( only tsc and acpi_pm are avalable)
Posts: 580
Threads: 29
Likes Received: 221 in 174 posts
Likes Given: 524
Joined: Jan 2019
Reputation:
178
(13-Apr-2023, 08:36 PM)vinaymoturi Wrote: (13-Apr-2023, 12:05 PM)hkphantomgtr Wrote: (12-Apr-2023, 02:14 PM)vinaymoturi Wrote: (11-Mar-2023, 01:20 PM)hkphantomgtr Wrote: (11-Mar-2023, 05:17 AM)musicnut23 Wrote: ↵
Hi there! It's been over a year since I peeked into the Forums to check the status of everything, and even longer since I went through the install process. Been running on 1.2.something with JRiver 27, but will be trying out the latest over the weekend.
I'm a little fuzzy on the install process. Do I need to start with 1.2.6 and load every firmware update up-to and including 1.2.11, or does 1.2.11 include all the updates in-between?
Note: This will be a clean install of Ubuntu 22.04LTS and SnakeOil on a seperate drive. Not upgrading the existing setup.
If you're starting from the ordinary Ubuntu desktop distro, then please choose "Minimum Installation" for much unnecessary softwares.
And then after successfully installed, please type a command to replace the kernel with the lowlatency kernel. That will significantly improve sound quality in all aspects.
If you would like to further enhance the sound quality, of course the RT kernel is the best and you can directly install RT kernel from ordinary kernel, without installing Low Latency kernel. But you need to go thru some more simple and straightforward steps.
And after everything is set, you may play around with the clocksource. To me, HPET let me enjoy the sound much more than TSC.
Have fun! 
what is the command for replacing the kernel with lowlatency kernel
Code: sudo apt install linux-lowlatency
hi,
I installed the low latency kernel, but, no hpet option in my system ( only tsc and acpi_pm are avalable)
hpet is inhibited by the power saving function of the ubuntu native kernel. So you just go to CMOS and disable all those power saving functions, e.g. C3, C5 state and etc. Then you'll see hpet appears automatically.
Posts: 65
Threads: 9
Likes Received: 11 in 10 posts
Likes Given: 28
Joined: Jan 2021
Reputation:
11
Location: India
(11-Mar-2023, 03:37 PM)Bromf Wrote: (11-Mar-2023, 01:33 PM)Snoopy8 Wrote: (11-Mar-2023, 01:20 PM)hkphantomgtr Wrote: (11-Mar-2023, 01:33 PM)Snoopy8 Wrote: (11-Mar-2023, 01:20 PM)hkphantomgtr Wrote: Hi, i follwed this procedure installed on my intel nuc 8i3beh everythiing is working fine. But, i am unable to connect to wifi thru internal wifi card. externel usb dongle works fine. any solution for this.
If you're starting from the ordinary Ubuntu desktop distro, then please choose "Minimum Installation" for much unnecessary softwares. OK to use minimum install of desktop version. But I had issues using minimum install of 22.04 server version. SO would not run, but no idea why.
Just don't use other than the standard server install. The minimum server install leaves out several packages needed for the Snakeoil GUI.
You can install those afterwards but best to use the standard install.
No need for the full Ubuntu desktop nor the minimal server.
Goldilocks !! and the bears... just use the server version and the wiki
https://www.snakeoil-os.net/wiki/Install...ller-shell OK to use minimum install of desktop version. But I had issues using minimum install of 22.04 server version. SO would not run, but no idea why.
Download the legacy 20.04 server version and install it then upgrade to 22.04 then do the Snakeoil install.
https://cdimage.ubuntu.com/ubuntu-legacy...4/release/ #Do select the ssh option within the install
https://www.techrepublic.com/article/how...-to-22-04/
https://www.snakeoil-os.net/wiki/Install...ller-shell
Posts: 580
Threads: 29
Likes Received: 221 in 174 posts
Likes Given: 524
Joined: Jan 2019
Reputation:
178
(14-Apr-2023, 03:08 PM)vinaymoturi Wrote: (11-Mar-2023, 03:37 PM)Bromf Wrote: (11-Mar-2023, 01:33 PM)Snoopy8 Wrote: (11-Mar-2023, 01:20 PM)hkphantomgtr Wrote: (11-Mar-2023, 01:33 PM)Snoopy8 Wrote: OK to use minimum install of desktop version. But I had issues using minimum install of 22.04 server version. SO would not run, but no idea why.
Just don't use other than the standard server install. The minimum server install leaves out several packages needed for the Snakeoil GUI.
You can install those afterwards but best to use the standard install.
No need for the full Ubuntu desktop nor the minimal server.
Goldilocks !! and the bears... just use the server version and the wiki
https://www.snakeoil-os.net/wiki/Install...ller-shell OK to use minimum install of desktop version. But I had issues using minimum install of 22.04 server version. SO would not run, but no idea why.
Download the legacy 20.04 server version and install it then upgrade to 22.04 then do the Snakeoil install.
https://cdimage.ubuntu.com/ubuntu-legacy...4/release/ #Do select the ssh option within the install
https://www.techrepublic.com/article/how...-to-22-04/
https://www.snakeoil-os.net/wiki/Install...ller-shell
WoOoOoh! That's so interesting.
Posts: 88
Threads: 15
Likes Received: 13 in 11 posts
Likes Given: 4
Joined: Mar 2021
Reputation:
8
Location: Netherlands
I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work?
I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server
Posts: 829
Threads: 46
Likes Received: 305 in 243 posts
Likes Given: 510
Joined: Mar 2019
Reputation:
239
Location: Melbourne, Australia
(24-Apr-2023, 01:50 AM)Tecko Wrote: I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work?
I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server I assume you are using USB. Have you tried another USB port and another USB cable? Also, what version of Ubuntu was it previously working with?
Posts: 580
Threads: 29
Likes Received: 221 in 174 posts
Likes Given: 524
Joined: Jan 2019
Reputation:
178
(24-Apr-2023, 01:50 AM)Tecko Wrote: I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work?
I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server
Pioneer life is always full of challenge. Good luck!
Posts: 88
Threads: 15
Likes Received: 13 in 11 posts
Likes Given: 4
Joined: Mar 2021
Reputation:
8
Location: Netherlands
(24-Apr-2023, 05:50 AM)Snoopy8 Wrote: (24-Apr-2023, 01:50 AM)Tecko Wrote: I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work?
I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server I assume you are using USB. Have you tried another USB port and another USB cable? Also, what version of Ubuntu was it previously working with?
Yes USB dac. I think it was version 23.04 from Ubuntu that was the problem. Installed 22.04.2 LTS . Works now.
Posts: 580
Threads: 29
Likes Received: 221 in 174 posts
Likes Given: 524
Joined: Jan 2019
Reputation:
178
(24-Apr-2023, 05:51 PM)Tecko Wrote: (24-Apr-2023, 05:50 AM)Snoopy8 Wrote: (24-Apr-2023, 01:50 AM)Tecko Wrote: I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work?
I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server I assume you are using USB. Have you tried another USB port and another USB cable? Also, what version of Ubuntu was it previously working with?
Yes USB dac. I think it was version 23.04 from Ubuntu that was the problem. Installed 22.04.2 LTS . Works now.
Did you install the low latency kernel, or even the real time kernel yet?
Posts: 88
Threads: 15
Likes Received: 13 in 11 posts
Likes Given: 4
Joined: Mar 2021
Reputation:
8
Location: Netherlands
26-Apr-2023, 04:05 PM
(This post was last modified: 26-Apr-2023, 04:32 PM by Tecko.)
(25-Apr-2023, 12:54 AM)hkphantomgtr Wrote: (24-Apr-2023, 05:51 PM)Tecko Wrote: (24-Apr-2023, 05:50 AM)Snoopy8 Wrote: (24-Apr-2023, 01:50 AM)Tecko Wrote: I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work?
I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server I assume you are using USB. Have you tried another USB port and another USB cable? Also, what version of Ubuntu was it previously working with?
Yes USB dac. I think it was version 23.04 from Ubuntu that was the problem. Installed 22.04.2 LTS . Works now.
Did you install the low latency kernel, or even the real time kernel yet?
Just the generic kernel. That is the only option in snakeoil OS.
After updateing OS NAS is not able to add NAS to snakeoil-os. (cifs)
I need to reinstall the system got errors when adding NAS:
Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:30:57 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:30:57 2023] CIFS: VFS: session 00000000d3175c3b has no tcon available for a dfs referral request
[wo apr 26 10:30:57 2023] CIFS: VFS: cifs_mount failed w/return code = -13
[wo apr 26 10:31:01 2023] CIFS: Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:31:01 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:31:01 2023] CIFS: VFS: session 000000007a969d5c has no tcon available for a dfs referral request
[wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13
|
Possibly Related Threads… |
Thread |
Author |
Replies |
Views |
Last Post |
|
Snakeoil Firmware - 1.2.6 (Gear Isolation U6) |
agent_kith |
26 |
10,027 |
08-Sep-2023, 01:15 PM
Last Post: hkphantomgtr
|
|
Snakeoil Firmware - 1.2.13 (Gear Isolation U13) |
agent_kith |
4 |
4,429 |
06-Sep-2023, 07:59 AM
Last Post: agent_kith
|
|
Snakeoil Firmware - 1.2.12 (Gear Isolation U12) |
agent_kith |
0 |
1,143 |
11-Jun-2023, 04:17 PM
Last Post: agent_kith
|
|
Snakeoil Firmware - 1.2.10 (Gear Isolation U10) |
agent_kith |
18 |
7,648 |
14-Feb-2023, 01:55 AM
Last Post: uglymusic
|
|
Snakeoil Firmware - 1.2.9 (Gear Isolation U9) |
agent_kith |
2 |
1,786 |
31-Dec-2022, 06:19 PM
Last Post: ea59
|
Users browsing this thread: 1 Guest(s)
|
Latest Threads
|
Android Firefox issues with forum
Last Post: agent_kith
10-Jun-2025 04:45 PM
» Replies: 21
» Views: 2030
|
[split] Possible To Load Snakeoil OS in ...
Last Post: Snoopy8
09-Jun-2025 06:43 AM
» Replies: 14
» Views: 1500
|
Snakeoil 1.4.3 (High End U3)
Last Post: hkphantomgtr
05-Jun-2025 03:58 PM
» Replies: 67
» Views: 8868
|
Snakeoil with Ubuntu Desktop ?
Last Post: Snoopy8
02-Jun-2025 09:38 AM
» Replies: 8
» Views: 903
|
Add IR remote control using Flirc USB in...
Last Post: Snoopy8
31-May-2025 03:50 PM
» Replies: 5
» Views: 654
|
Work In Progress: 1.4.4
Last Post: hkphantomgtr
29-May-2025 11:44 PM
» Replies: 44
» Views: 4979
|
SQ difference - Raspberry Pi vs x86_64?
Last Post: Snoopy8
27-May-2025 02:16 PM
» Replies: 42
» Views: 5380
|
Snakeoil 1.4.0 (High End)
Last Post: aabman
25-May-2025 11:35 AM
» Replies: 93
» Views: 14826
|
new install issues
Last Post: carlodim
23-May-2025 09:56 AM
» Replies: 42
» Views: 4396
|
Is this project still alive?
Last Post: agent_kith
20-May-2025 03:11 PM
» Replies: 10
» Views: 1168
|
SnakeoilOS Mission Statement
|
Our mission is to create a free to use computer OS that is easy to install, intuitive to operate and play music that will connect and engage with you emotionally.
SnakeoilOS gives you the freedom to spend more time on listening, enjoying and exploring music. Wasting time on computers is now a thing of the past! Everything is constantly evolving/improving. Please check back often for updates.
If you like this project, do show your support with a small token donation. All donations collected will be used to run this website, and for purchasing new equipment for the project.
|
|
|