(18-Jan-2022, 06:47 PM)agent_kith Wrote: Basically, enable the host to a IP address and port to 6600. Save the file, and restart your computer. Does Mympd work now?
I gave it a shot but MyMPD still says "MPD Disconnected", here's what I came up with.
![[Image: Snake-Oil-MPD-config-1-2.png]](https://i.ibb.co/yFrK3WJ/Snake-Oil-MPD-config-1-2.png)
Then; Ctrl + X, Y, enter, sudo reboot.
I checked MyMPD and it was still down so just to make sure it wasn't my network I tried to see if I was connected to the RPI. I followed this guide and tried to check the connections my computer was connected to using netstat -aon.
![[Image: netstat-rpi.png]](https://i.ibb.co/gV0MW8g/netstat-rpi.png)
I'm not sure how to interpret these results because the IP of the RPI is 192.168.2.163... no other RPI's on the network. Maybe this doesn't mean anything.
I'm going to look into the network more and see if that's the problem.