Using both Lan port on Intel I210-AT, one in the switch and the other in the Streamer

[bobzy]

Hi everyone,

I need of your help about one thing.

I want to use both of my Lan port on my motherboard (Supermicro X10SBA-L with Dual LAN Intel I210-AT).

eth0 connected to my switch
eth1 connected to my streamer (Linn DS)

My current network path :
NAS -> Switch -> Music Server (snakeoil) -> Switch -> Streamer (Linn DS)

What I want :
NAS -> Switch -> Music Server (snakeoil) -> Streamer (Linn DS)

Basicly, Music Server sending directly to the Streamer.

I have not test too much thing since my knowledge in network is not so good.
But, I have already asign static IPv4 with my Router (Apple Airport Extreme) to both ports on the motherboard (xx.0.1.23 and xx.0.1.24) and the Streamer (xx.0.1.4).

But when I plug both Lan, my Linn DS don’t appear on the network, the only way is to plug directly the Linn DS to my switch.

So, with my small understanding of network, it’s seem that Snakeoil os dont make automatic connection with a device like a standard switch do.

Also, when I start the computer, not always, but often, the phrase « A start job is running for raise ne… interfaces (… / 5min 2s) take the full 5min 2s to complete the reboot.

I know that configuration can work, because I based my server on a well know server using the same Motherboard.

Here a picture of the network tab.




jpg to url

Any thoughts about that ?

Thank a lot for your help.

Bob