![]() |
Snakeoil 1.4.3 (High End U3) - Printable Version +- Snakeoil Forums (https://forums.snakeoil-os.net) +-- Forum: Snakeoil Resource (https://forums.snakeoil-os.net/Forum-Snakeoil-Resource) +--- Forum: Releases (https://forums.snakeoil-os.net/Forum-Releases) +--- Thread: Snakeoil 1.4.3 (High End U3) (/Thread-Snakeoil-1-4-3-High-End-U3) |
RE: Snakeoil 1.4.3 (High End U3) - lzyla - 10-Apr-2025 Hi Kith, Thank you for your hard work. I am on Ubuntu 24.10 and SO 1.4.0 I cannot update through apt as it seems my ubuntu version is too high. I added noble to apt/sources.list but still can't find snakeoil package. So I manually removed my 1.4.0 and tried new installation procedure but installer doesn't start as it fails on ubuntu version checking (oracular not supported). Where to download the 1.4.3 to manually install with apt? Thank you! RE: Snakeoil 1.4.3 (High End U3) - hkphantomgtr - 10-Apr-2025 (10-Apr-2025, 06:05 PM)lzyla Wrote: Hi Kith, Probably you got to reinstall to be 24.04 first. RE: Snakeoil 1.4.3 (High End U3) - emptor - 20-Apr-2025 Hi everyone, been a while since last visit. Thanks @agent_kith for the updates and 1.4.3! I was (am?) on 1.3.0 when I did the Web os update. It took a whiles, went through its paces before finishing. I rebooted but still says I'm on 1.3.0. I tried updating again and this time was pretty quick to point out nothing to update? ![]() ![]() RE: Snakeoil 1.4.3 (High End U3) - hkphantomgtr - 20-Apr-2025 (20-Apr-2025, 12:51 PM)emptor Wrote: Hi everyone, been a while since last visit. Thanks @agent_kith for the updates and 1.4.3! Hey, long time no see. How are you, pal? Look, there are some changes for updating/installing SO. I'm not sure which one works on your 1.3.0 case. Please try 1 by 1 (I mean the update/install method in each release from 1.4.0). And above all, the ubuntu must upgraded to 24.04 first, as described in 1.4.0 thread. https://forums.snakeoil-os.net/Thread-Snakeoil-1-4-0-High-End https://forums.snakeoil-os.net/Thread-Snakeoil-1-4-1-High-End-U1 https://forums.snakeoil-os.net/Thread-Snakeoil-1-4-2-High-End-U2 Good luck and enjoy. (the sound is much much better than 1.3.0) ![]() RE: Snakeoil 1.4.3 (High End U3) - emptor - 20-Apr-2025 (20-Apr-2025, 02:38 PM)hkphantomgtr Wrote:(20-Apr-2025, 12:51 PM)emptor Wrote: Hi everyone, been a while since last visit. Thanks @agent_kith for the updates and 1.4.3! Thx so much for replying, knew you'd be able to point me in the right direction. Haven't upgraded ubuntu in a while. Will I have to create another real time kernel again? That alone makes me want to avoid upgrading haha RE: Snakeoil 1.4.3 (High End U3) - hkphantomgtr - 20-Apr-2025 (20-Apr-2025, 03:27 PM)emptor Wrote:(20-Apr-2025, 02:38 PM)hkphantomgtr Wrote:(20-Apr-2025, 12:51 PM)emptor Wrote: Hi everyone, been a while since last visit. Thanks @agent_kith for the updates and 1.4.3! You're welcome, pal. Look, you've taken me by surprise that you didn't use RT kernel yet. Look, in fact, you just need to subscribe a free service from Ubuntu and patch it. That's all. (of course, your PC needs a reboot to make it take effect.) Yet above all, you got to upgrade the ubuntu to 24.04 first, because new SO only can be installed in Ubuntu 24.04. Code: sudo apt update && apt full-upgrade -y It's gonna take some times and again, reboot is needed. And then, 1) subscribing membership (free for personal use, up to 5 pc online at the same time) https://ubuntu.com/pro/subscribe 2) install ubuntu pro in your pc Code: sudo apt install -y ubuntu-advantage-pro 3) attach your pc to that "pro" membership with the token give you in the above "pro" page after registration Code: sudo pro attach <your token code> the output will looks like....... Quote:Attaching the machine... 4) patching your pc with realtime kernel Code: sudo pro enable realtime-kernel The output will looks like........ Quote:One moment, checking your subscription first 5) after reboot, you can see "Realtime" in the name of the kernel PHP Code: uname -a Good Luck and have fun! ![]() RE: Snakeoil 1.4.3 (High End U3) - emptor - 20-Apr-2025 @hkphantomgtr , you're a gem with all the steps. I am using a real time kernel with 22.04. I'll create a new one with 24.04. Are you still using hpet for timing? RE: Snakeoil 1.4.3 (High End U3) - hkphantomgtr - 20-Apr-2025 (20-Apr-2025, 04:46 PM)emptor Wrote: @hkphantomgtr , you're a gem with all the steps. I'm afraid that's too much to me, pal. Yeah, I've tried tsc and single core setting for almost a year, moved my speakers to accommodate and maximize the sonic effect. Yet I found hpet and multi-cores still suit me the best. ![]() RE: Snakeoil 1.4.3 (High End U3) - emptor - 20-Apr-2025 @hkphantomgtr , all done thanks to your easy instructions!!!! the RT kernel updated again when I updated the snakeoil OS. how may CPUs do you dedicate to music? I'm give 2 of my 4 ![]() RE: Snakeoil 1.4.3 (High End U3) - hkphantomgtr - 20-Apr-2025 (20-Apr-2025, 06:10 PM)emptor Wrote: @hkphantomgtr , all done thanks to your easy instructions!!!! You're welcome and you're brilliant, pal In my understanding, 1 core only for the music. Please correct me if I'm wrong. ![]() |