[split] Trouble Mounting CIFS share in 1.2.0 (Gear Isolation)

[Steely]

Hi,
Having trouble mounting my CIFS share,
I used to use Daphile, And to mount the share i used,

cifs://Tony@.168.1.123:/Music

I use a Synology NAS that is password protected,
Share on NAS is.

Music@volume1,Available:3.2TB, Total 3.58TB

Would like to know how to mount share on Snakeoil Gear Isolation,

Thanks in advance,

Tony

[agent_kith]

Hi,
Having trouble mounting my CIFS share,
I used to use Daphile, And to mount the share i used,

cifs://Tony@.168.1.123:/Music

I use a Synology NAS that is password protected,
Share on NAS is.

Music@volume1,Available:3.2TB, Total 3.58TB

Would like to know how to mount share on Snakeoil Gear Isolation,

Thanks in advance,

It should still work (At least in my upgraded setup), follow the instructions here.

Are you running this from a fresh Ubuntu install, or you run the installer over an older Snakeoil install?

Some diagnostics steps:

1. SSH into your Snakeoil PC and type in the command "mount.cifs", does it work? If yes, then go to step 3
   
2. If above doesn't work, run the command "sudo apt install -y cifs-utils" and try again
   
3. Check your NAS and see what Samba options is needed. Is it v1 only?
   
4. Any logs from your NAS saying why it fails?
   

[Bromf]

So should be.. (select CIFS  for the protocol)
//volume1.local/Music     or  //168.1.123/Music      (Check that ip...)
for the share and then in the boxes at right, the user for the share (windows account) Tony (?) and their password and the (if default share setup) WORKGROUP

mine is...
//omvhpt.local/music       (etc)

[Steely]

Hi,
Having trouble mounting my CIFS share,
I used to use Daphile, And to mount the share i used,

cifs://Tony@.168.1.123:/Music

I use a Synology NAS that is password protected,
Share on NAS is.

Music@volume1,Available:3.2TB, Total 3.58TB

Would like to know how to mount share on Snakeoil Gear Isolation,

Thanks in advance,

It should still work (At least in my upgraded setup), follow the instructions here.

Are you running this from a fresh Ubuntu install, or you run the installer over an older Snakeoil install?

Some diagnostics steps:

1. SSH into your Snakeoil PC and type in the command "mount.cifs", does it work? If yes, then go to step 3
   
2. If above doesn't work, run the command "sudo apt install -y cifs-utils" and try again
   
3. Check your NAS and see what Samba options is needed. Is it v1 only?
   
4. Any logs from your NAS saying why it fails?
   

Hi, 
Still not working, I am getting error 95

Cheers,
Tony

[Bromf]

Hi,
Having trouble mounting my CIFS share,
I used to use Daphile, And to mount the share i used,

cifs://Tony@.168.1.123:/Music

I use a Synology NAS that is password protected,
Share on NAS is.

Music@volume1,Available:3.2TB, Total 3.58TB

Would like to know how to mount share on Snakeoil Gear Isolation,

Thanks in advance,

It should still work (At least in my upgraded setup), follow the instructions here.

Are you running this from a fresh Ubuntu install, or you run the installer over an older Snakeoil install?

Some diagnostics steps:

1. SSH into your Snakeoil PC and type in the command "mount.cifs", does it work? If yes, then go to step 3
   
2. If above doesn't work, run the command "sudo apt install -y cifs-utils" and try again
   
3. Check your NAS and see what Samba options is needed. Is it v1 only?
   
4. Any logs from your NAS saying why it fails?
   

Hi, 
Still not working, I am getting error 95

Cheers,
Tony

As AK has mentioned, could be a Samba version error. Synology is not the most friendly NAS.

This may help with error 95....setting samba-v3 on the Synology NAS worked
https://www.truenas.com/community/thread...-95.71137/