[SOLVED] rpcbind: cannot create socket for udp6 and tcp6

[Leonard]

 

I have now finally managed to install the 64 bit version on the Atom board and get to work. However I had to use a screen and keyboard to login to the prompt and set my ipaddress manually (sudo ifconfig eth0 ....)

Using the 32-bit version I don't see a chance to login as the boot process seems to get stuck.

Do you have a DHCP server set up properly in your network (Say a router)? One of the pre-requisites of Snakeoil is to have a DHCP server setup and configured.

Yes I have a DHCP server set up. Normally it should give a fixed ip address based on the MAC address. This is working fine when booting via PXE.