![]() |
Trouble saving network configuration in Snakeoil 1.1.8 - Printable Version +- Snakeoil Forums (https://forums.snakeoil-os.net) +-- Forum: Snakeoil Topics (https://forums.snakeoil-os.net/Forum-Snakeoil-Topics) +--- Forum: Support & Troubleshooting (https://forums.snakeoil-os.net/Forum-Support-Troubleshooting) +--- Thread: Trouble saving network configuration in Snakeoil 1.1.8 (/Thread-Trouble-saving-network-configuration-in-Snakeoil-1-1-8) |
Trouble saving network configuration in Snakeoil 1.1.8 - seafoodlover - 15-Feb-2020 my network setting page, the save button suddenly not working. After I change the setting, it doesn't let me save. ![]() RE: Snakeoil Firmware - 1.1.8 (Blind Testing Update 8) - agent_kith - 15-Feb-2020 Try and put a proper IP address into the DNS field. And see if that works? The DNS field is wrong, but the UI didn't show it as an error, but there is, reason why the Save button is disabled. RE: Snakeoil Firmware - 1.1.8 (Blind Testing Update 8) - seafoodlover - 15-Feb-2020 after I enter an IP in DNS field, i also changed the MTU to 8192, it let me save. but after reboot the DNS changed back to "run" and MTU changed back to 1500 ![]() ![]() i also manually added MTU 8192 in interface file, but after reboot, it removes MTU 8192. But I ping between my snakeoil pc and a jumbo frame enabled router with 8000 packet size, they both ok, so i think that serve the purpose anyway RE: Trouble saving network configuration in Snakeoil 1.1.8 - agent_kith - 16-Feb-2020 Looks like a bug. Can you copy and paste your /etc/network/interfaces file here so I can have a look? Will fix this in the next update once I find out why it has problems parsing your file. RE: Trouble saving network configuration in Snakeoil 1.1.8 - seafoodlover - 17-Feb-2020 ray@Ray-Music:~$ cat /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.4 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 203.185.0.37 auto eth1 iface eth1 inet manual RE: Trouble saving network configuration in Snakeoil 1.1.8 - agent_kith - 18-Feb-2020 Hmm. Which I don't quite get the problem you have, I'm getting "Not a String" errors again. I'll look into this and try and fix it. Having said that, most network cards using the Realtek r8169 driver cannot do Jumbo frames of 9k. I'm also going to improve the WebApp aspect to report the true MTU size vs the desired size, and report a warning if they don't mathc. RE: Trouble saving network configuration in Snakeoil 1.1.8 - agent_kith - 05-Mar-2020 The "run" field in DNS will be fixed in Blind Testing U9. The "not a string" error is intermittent. Happened to me twice, but never again. Will be nice to know which field is actually complaining about this. |