![]() |
[SOLVED] How to install Netgear A6200 wifi drivers - Printable Version +- Snakeoil Forums (https://forums.snakeoil-os.net) +-- Forum: Snakeoil Topics (https://forums.snakeoil-os.net/Forum-Snakeoil-Topics) +--- Forum: Support & Troubleshooting (https://forums.snakeoil-os.net/Forum-Support-Troubleshooting) +--- Thread: [SOLVED] How to install Netgear A6200 wifi drivers (/Thread-SOLVED-How-to-install-Netgear-A6200-wifi-drivers) |
How to install Netgear A6200 wifi drivers - realysm42 - 24-Aug-2019 Hi, Up until today, I've used an ethernet connection for SO and it's worked flawlessly. However, due to switching over to NBN (and the router being in a different part of my house), this connection is no longer practical. I plugged in my Netgear A6200 wifi dongle and it does... nothing! It doesn't even light up; I plugged a generic USB mouse into the same USB slot and it lit up (and worked in my UEFI) immediately. I've googled this issue and tried every instruction I can find, none of which have worked. This collection of instructions sounded hopeful: https://askubuntu.com/questions/460277/how-to-get-netgear-a6200-to-work-on-14-04 But when I copy and paste the commands, they all fail at some point. This means that I can't use my hi-fi at all now - TJ, please can you help me with this? I wasted hours of my time trying to fix the issue before to reaching out. RE: How to install Netgear A6200 wifi drivers - agent_kith - 24-Aug-2019 (24-Aug-2019, 06:56 PM)realysm42 Wrote: Hi,Wifi isn't supported at the moment. However, if you like, I can build a custom kernel, and you can setup wpa_supplicant manually to enable it. Do you want that? As mentioned elsewhere, a better solution is to connect your PC to a wifi bridge, or a mesh and get connection from there. Ubiquity Unifi WAP now supports meshing and will be perfect for this (if it works, I have yet to try it). Let me know if you want the Wifi kernel. RE: How to install Netgear A6200 wifi drivers - realysm42 - 31-Aug-2019 (24-Aug-2019, 08:09 PM)agent_kith Wrote:(24-Aug-2019, 06:56 PM)realysm42 Wrote: Hi,Wifi isn't supported at the moment. However, if you like, I can build a custom kernel, and you can setup wpa_supplicant manually to enable it. Do you want that? Thanks TJ. I ended up buying a 30 meter Ethernet cable - much easier then messing about with this stuff. RE: How to install Netgear A6200 wifi drivers - agent_kith - 01-Sep-2019 (31-Aug-2019, 08:24 PM)realysm42 Wrote: Thanks TJ. I ended up buying a 30 meter Ethernet cable - much easier then messing about with this stuff.Go to admit, been so deep down the Wifi rabbit hole, I failed to consider this solution! At all.. You guys keep me grounded, and serves as a constant reminder the simplest solution is the best solution ![]() |