Snakeoil Forums
Snakeoil 1.4.1 (High End U1) - Printable Version

+- Snakeoil Forums (https://forums.snakeoil-os.net)
+-- Forum: Snakeoil Resource (https://forums.snakeoil-os.net/Forum-Snakeoil-Resource)
+--- Forum: Releases (https://forums.snakeoil-os.net/Forum-Releases)
+--- Thread: Snakeoil 1.4.1 (High End U1) (/Thread-Snakeoil-1-4-1-High-End-U1)

Pages: 1 2 3

RE: Snakeoil 1.4.1 (High End U1) - hkphantomgtr - 20-Mar-2025

(20-Mar-2025, 05:23 PM)carlodim Wrote: Thanks for this. It installs easily for me on Ubuntu 24.04 server on Raspberry Pi5 4gb but my Hifiberry Digi2 Pro HAT is not recognised as an output device. I'm currently using Audiolinux which finds the HAT as does GentooPlayer and Ropieee and Volumio.
[Image: image.png]

I followed this https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/ 
and edited "/boot/firmware/config.txt", then the hat works.

RE: Snakeoil 1.4.1 (High End U1) - carlodim - 20-Mar-2025

(20-Mar-2025, 05:37 PM)hkphantomgtr Wrote:
(20-Mar-2025, 05:23 PM)carlodim Wrote: Thanks for this. It installs easily for me on Ubuntu 24.04 server on Raspberry Pi5 4gb but my Hifiberry Digi2 Pro HAT is not recognised as an output device. I'm currently using Audiolinux which finds the HAT as does GentooPlayer and Ropieee and Volumio.
[Image: image.png]

I followed this https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/ 
and edited "/boot/firmware/config.txt", then the hat works.

Cheers and thanks. That worked!

RE: Snakeoil 1.4.1 (High End U1) - hkphantomgtr - 21-Mar-2025

(20-Mar-2025, 10:15 PM)carlodim Wrote:
(20-Mar-2025, 05:37 PM)hkphantomgtr Wrote:
(20-Mar-2025, 05:23 PM)carlodim Wrote: Thanks for this. It installs easily for me on Ubuntu 24.04 server on Raspberry Pi5 4gb but my Hifiberry Digi2 Pro HAT is not recognised as an output device. I'm currently using Audiolinux which finds the HAT as does GentooPlayer and Ropieee and Volumio.
[Image: image.png]

I followed this https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/ 
and edited "/boot/firmware/config.txt", then the hat works.

Cheers and thanks. That worked!

You're welcome.  Enjoy.  Smile

RE: Snakeoil 1.4.1 (High End U1) - claybomb - 21-Mar-2025

@agent_kith 

You should think about creating a snakeoil pi streamer product and sell it through schiit audio on consignment. I bet they would consider it. Think pi2aes audiophile grade pi with a user friendly plug n play snakeoil os that has some tweaking options plus the kernel builder. You could use their proprietary unison usb platform for output.💰 🤑 💸 💲 


RE: Snakeoil 1.4.1 (High End U1) - agent_kith - 21-Mar-2025

(21-Mar-2025, 10:22 AM)claybomb Wrote: @agent_kith 

You should think about creating a snakeoil pi streamer product and sell it through schiit audio on consignment. I bet they would consider it. Think pi2aes audiophile grade pi with a user friendly plug n play snakeoil os that has some tweaking options plus the kernel builder. You could use their proprietary unison usb platform for output.💰 🤑 💸 💲 

To be honest I'm just doing this project to share to everybody just how good Linux playback can be, not really in it to make money. However, seeing I'm currently without a job at the moment, this is worth considering. Schitt if you're reading this let's talk. Big Grin

RE: Snakeoil 1.4.1 (High End U1) - claybomb - 21-Mar-2025

https://www.head-fi.org/threads/schiit-happened-the-story-of-the-worlds-most-improbable-start-up.701900/

One of the founders, Jason Stoddard, is very active on his headfi thread. He will respond to direct messages. At the very least, you could bring some awareness to the benefits of snakeoil.

RE: Snakeoil 1.4.1 (High End U1) - jetski - 22-Mar-2025

Quote:And if this helps:
 sudo systemctl status snakeoil-rest.service 
● snakeoil-rest.service - Snakeoil RestAPI server
     Loaded: loaded (/etc/systemd/system/snakeoil-rest.service; enabled; preset: enabled)
     Active: activating (auto-restart) (Result: exit-code) since Wed 2025-03-19 10:03:47 GMT; 54ms ago
    Process: 2310 ExecStart=/usr/local/bin/snakeoil-server.sh (code=exited, status=1/FAILURE)
   Main PID: 2310 (code=exited, status=1/FAILURE)
        CPU: 8ms
Is there any text after this?

There should be log information at the end of the status command and hopefully that should hopefully say what's happening.

No - nothing - no text - just the command prompt

RE: Snakeoil 1.4.1 (High End U1) - agent_kith - 23-Mar-2025

(22-Mar-2025, 05:38 PM)jetski Wrote: No - nothing - no text - just the command prompt
Follow this thread and let's try and identify the problem together. This is a weird bug and I like weird bugs. :p