![]() |
Snakeoil 1.2.6 Beta 3 - Printable Version +- Snakeoil Forums (https://forums.snakeoil-os.net) +-- Forum: Snakeoil Testers (https://forums.snakeoil-os.net/Forum-Snakeoil-Testers) +--- Forum: Test Builds (https://forums.snakeoil-os.net/Forum-Test-Builds) +--- Thread: Snakeoil 1.2.6 Beta 3 (/Thread-Snakeoil-1-2-6-Beta-3) Pages:
1
2
|
RE: Snakeoil 1.2.6 Beta 3 - agent_kith - 01-Jul-2022 (30-Jun-2022, 09:12 PM)Snoopy8 Wrote: Emailed Diagnostic file a few hours ago...Yup got that, will have a closer inspection tonight. Will change the code and maybe use C/C++ system calls to grab the network information instead. Might be more universal. Also need to expose spotify logins to upmpdcli, and re-enable qobuz & tidal... Unsure why you're having MPD issues, I think the stop/start logic is happening too quickly so will also look into that tonight/tomorrow. Hopefully will be able to release a new beta this weekend. Now that everything is setup to be more streamlined, things are finally firing at a good pace recently. RE: Snakeoil 1.2.6 Beta 3 - hkphantomgtr - 01-Jul-2022 The UbuntuStudio 22.04 installation still got the same apt update problem. So it's installation can't be completed. This new installer works with Ubuntu 22.04 LTS and the installation is successful. Yet the new installed Snakeoil still can't mount drive/partition/NAS in webui (I know can mount in PuttY), just as previously reported. It's very headache. I tried to flash with earlier fw. Those 1.2.6 fw can't mount thru webui. After flashed with 1.2.5 FW, the system broke and got the same problem as b4. I mean appling the old installer in Ubuntu 22.04. ![]() That spent me 4 hrs this morning. I'm tired to these. I'll go back to UbuntuStudio 20.04. I hope you guys will keep trying. RE: Snakeoil 1.2.6 Beta 3 - agent_kith - 01-Jul-2022 (01-Jul-2022, 01:25 PM)hkphantomgtr Wrote: The UbuntuStudio 22.04 installation still got the same apt update problem. So it's installation can't be completed.Somewhere before I posted a message, about BIOS/UEFI u have to make to get it working. Have you tried that yet? (01-Jul-2022, 01:25 PM)hkphantomgtr Wrote: This new installer works with Ubuntu 22.04 LTS and the installation is successful. Yet the new installed Snakeoil still can't mount drive/partition/NAS in webui (I know can mount in PuttY), just as previously reported. It's very headache. I tried to flash with earlier fw. Those 1.2.6 fw can't mount thru webui. After flashed with 1.2.5 FW, the system broke and got the same problem as b4. I mean appling the old installer in Ubuntu 22.04.Hmm. That's an interesting error... I'll see if I can replicate this later tonight.. What kind of mount are you doing? NFS or CIFS? RE: Snakeoil 1.2.6 Beta 3 - agent_kith - 01-Jul-2022 bubbleupnp and upmpdcli fixed. Unsure about that MPD error, but the new changes should hopefully make things clearer. @hkphantomgtr have you tried disabling secure boot in the BIOS when installing Ubuntu Studio? Also, when you install Snakeoil, I'm assuming that's on a brand new OS, or over an existing one? RE: Snakeoil 1.2.6 Beta 3 - hkphantomgtr - 02-Jul-2022 (01-Jul-2022, 03:20 PM)agent_kith Wrote:(01-Jul-2022, 01:25 PM)hkphantomgtr Wrote: The UbuntuStudio 22.04 installation still got the same apt update problem. So it's installation can't be completed.Somewhere before I posted a message, about BIOS/UEFI u have to make to get it working. Have you tried that yet? In my memory your advices about BIOS/UEFI were related to another issue in last beta, #14 in Snakeoil 1.2.6 Alpha 1 (snakeoil-os.net). It's for that beta didn't work on 22.04, rather than UbuntuStudio 22.04 itself problem. Actually, Ubuntd Studio 22.04 can't finish itself installation. Last time you suggested me to turn off those "auto download update" options, yet there is no similar option, nor minimial installation found during Ubuntu Studio installation setup. #10 in Snakeoil 1.2.6 Alpha 1 (snakeoil-os.net). ![]() And for the webui mount issue, I need to mount a local M2 SSD in ext4, and for a NAS drive in NFS. The scenario is after I input the path and etc, pressing the "SAVE" button didn't show the box saying it's successfully added or not. CTRL-F5 also didn't show the drive I want to mount. I've mentioned in #7 in Snakeoil 1.2.6 Alpha 1 (snakeoil-os.net) Thanks for your concern. ![]() (01-Jul-2022, 08:02 PM)agent_kith Wrote: bubbleupnp and upmpdcli fixed. Unsure about that MPD error, but the new changes should hopefully make things clearer. AK, I didn't try disabling secure boot in the BIOS when installing Ubuntu Studio 22.04, as the Ubuntu installation aborted itself before it asks a reboot. And for the installation of SnakeOil, I apply the installer only in brand new OS. I've tried installing SnakeOil in the brand new OS, before and after fully updating the Ubuntu. I found it doesn't matter SnakeOil installation. This 1.2.6 beta 3 works on Ubuntu 22.04, none hiccup until mounting. And for the Ubuntu, I've tried to install as both "Erase Disk", and "Erase OS" (sort of name), but not "Alongside of other OS". I'm very sorry if I confused you with the beta 3 issues. RE: Snakeoil 1.2.6 Beta 3 - agent_kith - 02-Jul-2022 (02-Jul-2022, 08:07 AM)hkphantomgtr Wrote: Actually, Ubuntd Studio 22.04 can't finish itself installation. Last time you suggested me to turn off those "auto download update" options, yet there is no similar option, nor minimial installation found during Ubuntu Studio installation setup. #10 in Snakeoil 1.2.6 Alpha 1 (snakeoil-os.net).The abort timeout is due to secure boot. Disable that and it should work. Basically with Linux (Non windows), you'll want to disable any digital rights management (DRM) stuffs. (02-Jul-2022, 08:07 AM)hkphantomgtr Wrote: And for the webui mount issue, I need to mount a local M2 SSD in ext4, and for a NAS drive in NFS. The scenario is after I input the path and etc, pressing the "SAVE" button didn't show the box saying it's successfully added or not. CTRL-F5 also didn't show the drive I want to mount. I've mentioned in #7 in Snakeoil 1.2.6 Alpha 1 (snakeoil-os.net)Whoops. ![]() ![]() (02-Jul-2022, 08:07 AM)hkphantomgtr Wrote: And for the installation of SnakeOil, I apply the installer only in brand new OS. I've tried installing SnakeOil in the brand new OS, before and after fully updating the Ubuntu. I found it doesn't matter SnakeOil installation. This 1.2.6 beta 3 works on Ubuntu 22.04, none hiccup until mounting.So you're not getting any segmentation faults (Segfault) now? Will release the next beta once I've identified Snoopys network issue. Going to look at the diagnostic file soon. RE: Snakeoil 1.2.6 Beta 3 - agent_kith - 02-Jul-2022 @Snoopy8 Can you share a screenshot of your network page in the Snakeoil WebApp? Looks like you are using netplan. But so am I and don't have any issues. Although I would expect changing configuration will not work with netplan (I have a ticket for this, and have now moved this into 1.2.6). Once I get a screenshot I'll have a better idea what I'm dealing with. thanks. RE: Snakeoil 1.2.6 Beta 3 - hkphantomgtr - 02-Jul-2022 (02-Jul-2022, 09:11 AM)agent_kith Wrote:(02-Jul-2022, 08:07 AM)hkphantomgtr Wrote: Actually, Ubuntd Studio 22.04 can't finish itself installation. Last time you suggested me to turn off those "auto download update" options, yet there is no similar option, nor minimial installation found during Ubuntu Studio installation setup. #10 in Snakeoil 1.2.6 Alpha 1 (snakeoil-os.net).The abort timeout is due to secure boot. Disable that and it should work. Basically with Linux (Non windows), you'll want to disable any digital rights management (DRM) stuffs. Thanks a lot, AK! With your suggestion, I'll try again the UbuntuStudio 22.04 again after your next beta is out . And yes, 1.2.6 Beta 3 Installer works with Ubuntu 22.04 LTS. So far I really like the sound from 1.2.6 Beta 3 + UbuntuStudio 20.04 LTS in my new toy. 玩返轉頭..... HiFi PC - Haydn! - 兩聲道音響討論區 - Hiendy.com 影音俱樂部 - Powered by Discuz! Thank you very much for every effort you've made. ![]() RE: Snakeoil 1.2.6 Beta 3 - Snoopy8 - 02-Jul-2022 (02-Jul-2022, 09:53 AM)agent_kith Wrote: @Snoopy8 Can you share a screenshot of your network page in the Snakeoil WebApp? Looks like you are using netplan. But so am I and don't have any issues.Something happened between 1.2.6.1 (truncated screenshot which had MAC, Ip address etc..) and 1.2.6.3 ![]() ![]() RE: Snakeoil 1.2.6 Beta 3 - agent_kith - 03-Jul-2022 (02-Jul-2022, 04:27 PM)Snoopy8 Wrote: Something happened between 1.2.6.1 (truncated screenshot which had MAC, Ip address etc..) and 1.2.6.3 ![]() Keep doing a force refresh until your network information shows up. That should work, although modifying changes is not going to work (since you're using netplan). I've decided to add netplan support for this release, and also try and fix that damn caching issues. But looks like we're close to releasing a beta today (if I have time), and an official soon. One thing with disabling cache (if I finally get it to work), the first load will take slightly longer, hopefully that's a good price to pay that will fix all the translation errors and display quirks I keep seeing. Edit: 1.2.6 Beta 4 seems to have the right headers. Hopefully that'll work. Code: <meta http-equiv="Cache-Control" content="no-cache, no-store, must-revalidate"> |